Nature Woven weaves natural tones and contemporary softness into one seamless design. Its light beige-gray blend and gentle flowing grain give a grounded yet refreshing feeling. Inspired by handwoven textures and organic calm, Nature Woven is a tranquil base for relaxed, nature-connected interiors.
Interior Styles
Perfect for Zen Minimalist, Natural Japandi, Soft Scandinavian, or Eco-inspired Contemporary spaces. Best matched with off-white, muted cream walls, diffuse natural light, and furniture in light oak, rattan, linen, or clay textures.
Ideal spaces: compact apartments, wellness rooms, yoga studios, nature-based homestays, or serene reading corners. Nature Woven brings spatial harmony and understated sophistication.
Color and Tone
The neutral warm-gray tone offers visual ease and a sense of calm. Its oak grain flows gently with subtle tonal transitions, creating a woven visual effect—soft yet structured. EIR surface embossing replicates the authentic texture of real wood, enhancing tactile realism while keeping the design light and balanced.
Features & Quality
Crafted with a 20 mil (0.5mm) wear layer, Nature Woven is waterproof, impact and scratch resistant, and UV-stable. Quick-lock installation system, compatible with underfloor heating, and low maintenance.
Certified by FloorScore® for low VOC emissions—safe for homes, wellness spaces, and eco-conscious environments.
Certificates
Features
- Fast & easy assembly
- Compatible with floor heating
- Impact resistant
- UV resistant
- Stratch resistant
- Eco-friendly
- Not affected by stains
- Easily cleaned
- Resistant to chair castor abrasion
- Fire resistant
- Wear layer
| Title | Units | Requirement | Norm |
|---|---|---|---|
| Dimension | inch | 61″ x 9″ 1524mm x 228mm 5′ x 0.75′ Length: 0/+0.3 Width: 0/+0.1 |
ASTM F2055 |
| Total Thickness | mm | 8 mm -0.1/+0.13mm | ASTM F387 |
| Click systems | Uniclic Patented | ||
| Beveled Edge | Yes - Micro Bevel | ||
| Finish | EIR or Wood grain | ||
| Thickness of Wear Layer | 20 Mil 0.5mm |
ASTM F410 | |
| Underlayment optionally IXPE | mm | 1.5 mm IXPE Underlay |
|
| Net Weight | kgs/box | 4.5kgs/plank(±3%) 5 planks/box 22.5kgs/box |
|
| Package | 1459,38SQM | 4200 planks | 840 boxes | 21 pallets | 1 cont 20GP | ||
| Dimensional Stability | % | 0.02% | ASTM F2199 |
| Curling | mm | 0.10 mm | ISO 23999 |
| Squareness (plank) | mm | 0.15 mm | ASTM F2055 |
| Width Flatness | % | fw = 0.1% | ISO 24337 |
| Length Flatness | % | fl = 0.15% | ISO 24337 |
| Cupping Flatness | mm | 0.1 mm | ISO 24337 |
| Openings / Assembling | mm | 0.05 mm | ISO 24337 |
| Ledging | mm | 0.1 mm | ISO 24337 |
| Abrasion Resistance | mg | 4.1 mg | ASTM D4060-25 |
| ASTM Specification Classification | Class 1, Type B, Grade 1, Class B | ASTM F3261 | |
| Resistance to Staining | No visible staining, discoloration, or surface degradation | ASTM F925 | |
| Furniture Leg | No visible damage | ASTM F2753 | |
| Castor Chair | No visible damage after 25,000 cycles | ||
| Heat stability (color change) | ∆E ≤ 8.0 | ASTM F1514 | |
| Light Stability (Color Change Test) | ∆E ≤ 8.0 | ASTM F1515 | |
| Gloss Level | Ultra Matte <10 GU | ASTM D523 | |
| Locking Strength | kN/m | Longitudinal joint: 3.4 kN/m, Trans joint 3.6 kN/m |
ASTM F2823 |
| Impact Sound Reduction | IIC 72 | ASTM E492-09 | |
| STC Sound Testing | STC 68 | ASTM E90-09 | |
| IIC Sound Testing | IIC 72 | ASTM E 989-18 | |
| Static Electrical Loading | kV | ≤ 2.0 kV (2000V) | ASTM F150 |
| Micro Scratch Resistance | MSR-A1, MSR-B | EN 16094:2012, Procedure A&B | |
| Strickeer Impacted by a Falling Weight | 8.1J | ASTM D5420-21 | |
| Surface treatment (UV) | 2-pass UV cured urethane | ||
| Surface Integrity | No visible changes or only minor indentation | ASTM F1914 | |
| Residual Indentation | mm | 0.1 mm | ASTM F1914 |
| Static Load (Residual Indentation) | mm | 0.05 mm | ASTM F970 |
| Reaction to Fire | W/cm² | Class I (≥ 0.45 W/cm²) | ASTM E648 |
| Formaldehyde | CARB P2 | ASTM E1333 | |
| Pentachlorophenol (PCP) | ppm | PCP levels ≤ 5 ppm | CP 491510-01 |
| Thermal Resistance | m²·K/W | 0.02 to 0.05 m²·K/W (or 0.1 to 0.3 ft²·h·°F/BTU) |
ASTM C518 |
| Slip Resistance ( Slip Resistance for Coated Surfaces) | Dry Surface COF ≥ 0.50 Wet Surface COF ≥ 0.42 |
ASTM D2047 | |
| Floor Heating System | ° C | Max.27° C | Yes suitable, see separate installation instructions |
| FloorScore | confirm | Indoor Air Quality Certified to SCS-EC10.3-2014 v4.0 |
Post Comment(*) Required
-
Sản phẩm tốt đáng mua -
5/5 stars
Huy Chau - 06/08/2020 Sản phẩm chất lượng tốt, mẫu mã đẹp. Mình cảm thấy rất hài lòng, sẽ và luôn ủng hộ Floordi
