Warm Woven radiates a natural golden warmth, like a softly woven oak surface under soft daylight. With flowing grains and lively tonal movement, it brings together a cozy aesthetic and visual elegance. Warm Woven is ideal for interiors that aim to feel connected, calm, and welcoming.
Interior Styles
Perfect for Modern Farmhouse, Warm Japandi, Soft Rustic, or Coastal-inspired spaces. It pairs beautifully with warm neutral or pastel walls, natural light, and furnishings in rattan, untreated wood, ceramics, or textured fabrics.
Ideal spaces: living rooms, open kitchens, coastal homestays, or family gathering areas. Warm Woven enhances human connection and visual comfort throughout the home.
Color and Tone
The mid-warm golden tone promotes hospitality and calm vitality. Oak wood grains show natural variation in tone and direction, mimicking a woven pattern that feels artisanal. EIR surface embossing replicates the texture of real wood, elevating the tactile experience of every step.
Features & Quality
With a 20 mil (0.5mm) wear layer, Warm Woven is waterproof, scratch and impact resistant, UV-protected, and built for long-term durability. Quick to install, floor-heating compatible, and easy to clean.
FloorScore® certified for low VOCs—ideal for health-conscious homes and stylish, sustainable spaces.
Certificates
Features
- Fast & easy assembly
- Compatible with floor heating
- Impact resistant
- UV resistant
- Stratch resistant
- Eco-friendly
- Not affected by stains
- Easily cleaned
- Resistant to chair castor abrasion
- Fire resistant
- Wear layer
| Title | Units | Requirement | Norm |
|---|---|---|---|
| Dimension | inch | 61″ x 9″ 1524mm x 228mm 5′ x 0.75′ Length: 0/+0.3 Width: 0/+0.1 |
ASTM F2055 |
| Total Thickness | mm | 8 mm -0.1/+0.13mm | ASTM F387 |
| Click systems | Uniclic Patented | ||
| Beveled Edge | Yes - Micro Bevel | ||
| Finish | EIR or Wood grain | ||
| Thickness of Wear Layer | 20 Mil 0.5mm |
ASTM F410 | |
| Underlayment optionally IXPE | mm | 1.5 mm IXPE Underlay |
|
| Net Weight | kgs/box | 4.5kgs/plank(±3%) 5 planks/box 22.5kgs/box |
|
| Package | 1459,38SQM | 4200 planks | 840 boxes | 21 pallets | 1 cont 20GP | ||
| Dimensional Stability | % | 0.02% | ASTM F2199 |
| Curling | mm | 0.10 mm | ISO 23999 |
| Squareness (plank) | mm | 0.15 mm | ASTM F2055 |
| Width Flatness | % | fw = 0.1% | ISO 24337 |
| Length Flatness | % | fl = 0.15% | ISO 24337 |
| Cupping Flatness | mm | 0.1 mm | ISO 24337 |
| Openings / Assembling | mm | 0.05 mm | ISO 24337 |
| Ledging | mm | 0.1 mm | ISO 24337 |
| Abrasion Resistance | mg | 4.1 mg | ASTM D4060-25 |
| ASTM Specification Classification | Class 1, Type B, Grade 1, Class B | ASTM F3261 | |
| Resistance to Staining | No visible staining, discoloration, or surface degradation | ASTM F925 | |
| Furniture Leg | No visible damage | ASTM F2753 | |
| Castor Chair | No visible damage after 25,000 cycles | ||
| Heat stability (color change) | ∆E ≤ 8.0 | ASTM F1514 | |
| Light Stability (Color Change Test) | ∆E ≤ 8.0 | ASTM F1515 | |
| Gloss Level | Ultra Matte <10 GU | ASTM D523 | |
| Locking Strength | kN/m | Longitudinal joint: 3.4 kN/m, Trans joint 3.6 kN/m |
ASTM F2823 |
| Impact Sound Reduction | IIC 72 | ASTM E492-09 | |
| STC Sound Testing | STC 68 | ASTM E90-09 | |
| IIC Sound Testing | IIC 72 | ASTM E 989-18 | |
| Static Electrical Loading | kV | ≤ 2.0 kV (2000V) | ASTM F150 |
| Micro Scratch Resistance | MSR-A1, MSR-B | EN 16094:2012, Procedure A&B | |
| Strickeer Impacted by a Falling Weight | 8.1J | ASTM D5420-21 | |
| Surface treatment (UV) | 2-pass UV cured urethane | ||
| Surface Integrity | No visible changes or only minor indentation | ASTM F1914 | |
| Residual Indentation | mm | 0.1 mm | ASTM F1914 |
| Static Load (Residual Indentation) | mm | 0.05 mm | ASTM F970 |
| Reaction to Fire | W/cm² | Class I (≥ 0.45 W/cm²) | ASTM E648 |
| Formaldehyde | CARB P2 | ASTM E1333 | |
| Pentachlorophenol (PCP) | ppm | PCP levels ≤ 5 ppm | CP 491510-01 |
| Thermal Resistance | m²·K/W | 0.02 to 0.05 m²·K/W (or 0.1 to 0.3 ft²·h·°F/BTU) |
ASTM C518 |
| Slip Resistance ( Slip Resistance for Coated Surfaces) | Dry Surface COF ≥ 0.50 Wet Surface COF ≥ 0.42 |
ASTM D2047 | |
| Floor Heating System | ° C | Max.27° C | Yes suitable, see separate installation instructions |
| FloorScore | confirm | Indoor Air Quality Certified to SCS-EC10.3-2014 v4.0 |
Post Comment(*) Required
-
Sản phẩm tốt đáng mua -
5/5 stars
Huy Chau - 06/08/2020 Sản phẩm chất lượng tốt, mẫu mã đẹp. Mình cảm thấy rất hài lòng, sẽ và luôn ủng hộ Floordi
